Wooden dress: Update, skin tones

I’ve spent a good deal of time recently experimenting with mixing different strengths of dyes and water, and mixing them together to find the believable skin tone shades. While this has been fun, it’s also been really tedious since skin isn’t just light or dark brown, it’s also a little red and a little green and yellow. I’ve been mixing and mixing…and it was just today that I added the red. I think I might be getting a bit too specific, in that I’m trying to find the “right” shade, even though in the end, it’s going to look like wood that’s been dyed, no matter how much time I spend mixing. What I might try is to hold a few shades up to someone, and then take a picture. Cameras tend to flatten shades and from far away, I’m not sure if I would really be able to notice the individual fluctuations in skin tones, so I’d just see the overall tone (and be satisfied!). Eventually, I’m just going to have to stop and move on. But, I think I’m close.

Samples

The wood I’ve been using has been balsa and bass wood, that I found at Blick. I’ve been cutting them into 1″x3″ rectangles. For a while, I was using both types of wood but I’ve just been using the bass wood for now. The color is more consistent and the texture is smoother, which makes experimenting with shades easier. I guess it could be argued that skin is not always smooth and consistent. Alright, well, I just like it better. Plus, it’s cheaper.

In mixing the shades, I used a medicine dropper for infants to be precise in my measuring – not only so I can remake the shades again, but also so I can use tiny amounts of dye at a time. The dye is aniline dye, both in liquid (brown, red) and powder (blue, yellow). The dye is extremely strong, so only a tiny, tiny amount is needed at a time. The dropper lets me use 0.2mL of dye at a time, whereas for the powder I found this little plastic/rubber thing that has very shallow rectangles that I can fill with dye. Each little rectangle is about the size of a fingernail clipping, so these are very tiny rectangles. I think I prefer the liquid dye. It’s easier to work with; I’ve found very small particles of blue dye on what I thought was clean bass wood, which is annoying and wasteful since I have to start over with another piece.

When I first started, I was using foam cups, and starting over with my mixing everyday. Recently, I started using this Press and Seal plastic wrap and switched to small Dixie cups to store mixed dye so I don’t have to go through the whole process of making it again. The Dixie cups aren’t very storage friendly – not as good as the foam cups – but I can store more stuff on my desk and I don’t need to fill them up completely. And the Press n Seal lets me clean as I go. I also have a little notebook that I’ve written down a bunch of colors in and given them code names, like P1R20Y1G3. I just write down the ratios and how much water to dye I added so I can remix the colors again, if needed. For instance:
P1 = .2mL dye/25ml H20
R20 = .2mL dye/100mL H20
Y1 = 1rect of yellow dye powder/100mL H20
G3 = 3:1 ratio of green to water

…and so on. This can go on forever. I just bought the red today, so I’m looking forward to finally narrowing these colors down. I’m determined to find my skin color, which is hard to find anyway. I think if I can find me, I can find anyone.

Wooden Dress

Finally, after many tears, I have an idea for my Wearables final! (And, for Materials, too.)

In one of my Wearables classes, we had a workshop where our instructors, Despina Papadopoulos and Zach Eveland, went around to give each of us some one-on-one feedback about our projects. Up until this point, I’d been working along the route of making a pair of pants that turned on a switch or something when you walked. The idea came from thinking about the inner thighs or legs, which seem to come as a “target” area for exercise. But, honestly, my design really didn’t work for a few reasons. I wanted riding pants which someone self-conscious about their inner thighs probably wouldn’t wear. Then, it didn’t really seem to thoroughly reflect a lot of the research I’d previously done.

When Despina came over to see how I was doing, she had difficulty understanding my idea, and we went into the classroom to talk using the whiteboard. Well, she ended up asking a lot of really good questions…that sort of caught me off-guard…on a day or week when my confidence level was WAY low. I sort of ended up breaking down…. Despina gave me some really great encouragement and basically told me that I can’t fail in trying to do something, so I shouldn’t feel like my ideas are crappy. Eventually, I rejoined everyone else, and went back to brainstorming. By the end of that night, I’d already sketched out a new idea. And really, I just figured, “You know, just try it. If it’s crappy, fine.”

While I was thinking of my new idea, I thought of just one part of the body. The skin. And, in relation to my research, I obviously thought of skin color. And then I thought of what could represent skin color. In my Materials class, Peter Menderson showed us some really nice wood veneer samples, for different types of wood and in different colors. Different brown colors…like skin.

Wood. Skin. A wooden dress.

So, right after that night, I immediately started prototyping. First in paper, then in foam core. I used twine to connect the pieces, which I eventually secured with hot glue. So now I have a full dress. I actually can wear it – luckily for me, one of ITP’s dress forms pretty much has my measurements.

Now, I’ll need to look into different types of lumber, wood stains, connections – metal, twine, leather…? – and also just adjusting the height/width of each piece. Fully, my idea is to make a series of wooden dresses, from dark to light, representing a range of skin tones. Unfortunately, given the amount of time left, I don’t think that’s possible.